High temperature adhesive/glue
Specifiction: 45g/set, 12sets/inner, 12inners/CTN
Î± , Ï‰ -Dyhydroxyl Methyl Silicone
Color: Transparent, black, grey, blue, red.
Feature of sealant:
This product is one kind of sulfur silicone sealant with one acid
component which could be applied at any climate and could take
chemical reaction with the water in air rapidly. Good
aging-resistant ability, high flexible, perfect performance of high
or low temperature resistant. Several machine waster water
resistant, good elastic.
Scope of application:
This product is used for sealing of car, gear case of motor,
fore-and-art board, water pump, plane flange, cover board of other
1. Cleaning up the surface with the cotton fabric, guarantees the
surface not to have the dust, the greasy dirt, the rusty stain and
2. In order to obtain good outward appearance, paste the temporary
protection adhesive tape, near the place to be pasted after clean
the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the
4. Spread the sealant evenly on the place which need to be sealed
or bonded. The operation should be continuously, guarantee the
sealant continuously squeeze out at cylinder shape, move the glue
mouth evenly and slowly, prevent the form of bubble or hole is move
5. The sealant form shape at approximately 10 minutes, when
assembly maintains the gasket thickness, fold gathers the curing at
normal temperature 24 hours.
1. This product will release a few acetic acid in the
solidification process, the working conditions should maintain
2. Do not put within kids reach, non-toxic after solidifies
completely, avoid eye contact before solidification, if touches the
eye carelessly, use massive water to wash, if serious go to see a
3. When operation, must hold the glue steadily, cannot separate,
guards against mixes in the air and form bubble, affects the seal
4. After operation, take off the cap mouth immediately, close the
packing cover tightly to prevent the moisture enter and cause
solidification. Wipe off the glue left at glue mouth.
5. This product should be operated at temperature 5-40, relative
Storage and packing:
1. This product is non-flammable, seal store in 10-27 centigrade
cool dry place.
2. The shelf life for top grade acetic gasket maker s 12 months
from date of production.
3. Packing 45g/PC, 85g/PC, 85PC+3G promotion in tube.
We are China Adhesive manufacturer. And The adhesive is a compound
that adhesives or bonds two items together. Adhesives may come from
either natural or synthetic sources. Some modern adhesives are
extremely strong, and are becoming increasingly important in modern
construction and industry.
High Temperature Adhesive/Glue, Silicone Gasket Maker, High Temperature Gasket Images